Abrasion is the commonest reason a hose fails before its time, and it is the cheapest one to prevent. A spring guard or a plastic wrap costs a fraction of an assembly and a tiny fraction of the downtime, and it is the difference between a hose that lasts its design life and one that wears through in a season.
ပွတ်တိုက်မှုသည် ပိုက်တစ်ခု အချိန်မတိုင်မီ ပျက်ရသည့် အဖြစ်အများဆုံး အကြောင်းရင်းဖြစ်ပြီး၊ တားဆီးရန် အဈေးအသက်သာဆုံးလည်း ဖြစ်သည်။ စပရင်အကာ သို့မဟုတ် ပလပ်စတစ်ပတ်သည် assembly တစ်ခု၏ ဈေးအနည်းငယ်နှင့် အလုပ်ရပ်ချိန်၏ အလွန်နည်းသော အစိတ်အပိုင်းသာ ကုန်ကျပြီး၊ ဒီဇိုင်းသက်တမ်းအထိ ခံသောပိုက်နှင့် ရာသီတစ်ခုအတွင်း ပွန်းပြတ်သောပိုက်ကြား ကွာခြားချက် ဖြစ်သည်။
What is a spring hose guard?
စပရင် ပိုက်အကာဆိုတာဘာလဲ။
A steel spring wound over the hose so the spring takes the rubbing instead of the cover. It also limits how tightly the hose can bend near the fitting, which is where most kinks happen. Our range is sized by inside diameter — the AG84 fits .84 inch and the AG122 fits 1.22 inch, so measure the hose outside diameter rather than its bore when you order.
အကာအစား ပွတ်တိုက်မှုကို စပရင်က ခံနိုင်ရန် ပိုက်ပေါ် ရစ်ပတ်ထားသော သံစပရင် ဖြစ်သည်။ Fitting အနီးတွင် ပိုက် မည်မျှ ကျစ်ကျစ် ကွေးနိုင်သည်ကိုလည်း ကန့်သတ်ပေးပြီး၊ ထိုနေရာသည် ခေါက်ကျမှု အများဆုံး ဖြစ်ရာ နေရာ ဖြစ်သည်။ ကျွန်ုပ်တို့ အမျိုးအစားများကို အတွင်းအချင်းဖြင့် အရွယ်သတ်မှတ်သည် — AG84 သည် ၀.၈၄ လက်မ၊ AG122 သည် ၁.၂၂ လက်မ ဝင်သဖြင့် မှာသည့်အခါ ပိုက်၏ အတွင်းအချင်းမဟုတ်ဘဲ အပြင်အချင်းကို တိုင်းပါ။
When is plastic wrap the better choice?
ပလပ်စတစ်ပတ်က ဘယ်အချိန် ပိုကောင်းလဲ။
Where several hoses run together and you want to bundle and protect them at once, or where a steel spring would itself chafe something. Our PHW08 wrap is .5 inch inside diameter and comes in a 100 foot roll, which is the practical way to protect a long run or a whole loom. It also keeps a bundle tidy, which makes later inspection much easier.
ပိုက်များစွာ အတူတကွ သွားပြီး ၎င်းတို့ကို တစ်ပြိုင်နက် စုစည်းကာကွယ်လိုသည့်နေရာ သို့မဟုတ် သံစပရင်ကိုယ်တိုင် တစ်ခုခုကို ပွတ်မည့်နေရာတွင် ဖြစ်သည်။ ကျွန်ုပ်တို့ PHW08 ပတ်သည် အတွင်းအချင်း ၀.၅ လက်မဖြစ်ပြီး ၁၀၀ ပေ လိပ်ဖြင့် လာသည် — လမ်းကြောင်းရှည် သို့မဟုတ် loom တစ်ခုလုံးကို ကာကွယ်ရန် လက်တွေ့ကျသော နည်းလမ်း ဖြစ်သည်။ အစုအဝေးကို သပ်ရပ်စေသဖြင့် နောက်ပိုင်း စစ်ဆေးရာတွင်လည်း များစွာ လွယ်ကူစေသည်။
Where should protection go first?
ကာကွယ်မှုကို ဘယ်နေရာ အရင်ထည့်ရမလဲ။
Walk the machine with the hoses moving. Protect where a hose crosses a frame edge, where two hoses touch each other, where a hose passes near a hot surface, and the first hand-span behind every fitting. Those four places account for most abrasion failures, and they are visible in a couple of minutes.
ပိုက်များ ရွေ့လျားနေစဉ် စက်ကို လျှောက်ကြည့်ပါ။ ပိုက်သည် ဘောင်အနားကို ဖြတ်ရာ၊ ပိုက်နှစ်ချောင်း အချင်းချင်း ထိရာ၊ ပိုက်သည် ပူသောမျက်နှာပြင်အနီး ဖြတ်ရာ၊ နှင့် fitting တိုင်း၏ နောက်ကွယ် ပထမလက်တစ်ထွာကို ကာကွယ်ပါ။ ထိုနေရာလေးခုသည် ပွတ်တိုက်မှုကြောင့် ပျက်စီးမှု အများစုကို ဖြစ်စေပြီး၊ မိနစ်အနည်းငယ်အတွင်း မြင်နိုင်သည်။
Does a guard hide a problem?
အကာက ပြဿနာကို ဖုံးထားလား။
It can, and that is the one drawback. A hose under a spring guard cannot be inspected by eye, so a cover failure or a weep at the fitting goes unnoticed for longer. Build the guard so it can be slid back at service time, and include the guarded sections in the inspection routine rather than assuming they are safe because they are covered.
ဖုံးနိုင်ပြီး၊ ၎င်းသည် တစ်ခုတည်းသော အားနည်းချက် ဖြစ်သည်။ စပရင်အကာအောက်ရှိ ပိုက်ကို မျက်စိဖြင့် မစစ်နိုင်သဖြင့် အကာပျက်ခြင်း သို့မဟုတ် fitting တွင် စိမ့်ခြင်းကို ကြာကြာ မသိဘဲ နေနိုင်သည်။ ပြုပြင်ထိန်းသိမ်းချိန်တွင် ဆုတ်ဖယ်နိုင်အောင် အကာကို တပ်ပြီး၊ ဖုံးထားသောကြောင့် ဘေးကင်းသည်ဟု မယူဆဘဲ ကာကွယ်ထားသောအပိုင်းများကို စစ်ဆေးရေး လုပ်ရိုးလုပ်စဉ်တွင် ထည့်ပါ။
What else belongs in the accessory box?
ဆက်စပ်ပစ္စည်း သေတ္တာထဲ နောက်ဘာတွေ ပါသင့်လဲ។
Hose caps for finished and stored assemblies, cable ties and clamps sized so they hold without pinching, a marker for insertion marks, and a few spare bonded seals and O-rings in the sizes you use most. None of it is expensive and all of it saves a second trip.
ပြီးဆုံးပြီး သိမ်းထားသော assembly များအတွက် ပိုက်အဖုံးများ၊ မညှစ်ဘဲ ထိန်းနိုင်သော အရွယ်ရှိ ကြိုးနှင့် clamp များ၊ ထည့်သွင်းအမှတ်များအတွက် မာကာ၊ နှင့် အသုံးအများဆုံး အရွယ်များဖြင့် အပို bonded seal နှင့် O-ring အနည်းငယ်။ မည်သည့်အရာမျှ ဈေးမကြီးဘဲ အားလုံးက ဒုတိယအကြိမ် သွားရခြင်းမှ ကယ်တင်သည်။
How often should hoses be inspected?
ပိုက်တွေကို ဘယ်လောက်ကြာကြာ စစ်ရမလဲ။
Visually at every service, and more often on a machine that works hard. Look for cover damage, exposed wire, weeping at the crimp, hoses that have started to touch each other, and clamps that have worked loose. Two minutes with a torch finds nearly everything, and a hose caught at the cover stage is a planned replacement rather than an unplanned stop.
ပြုပြင်ထိန်းသိမ်းမှုတိုင်းတွင် မျက်စိဖြင့် စစ်ပြီး၊ အလုပ်ကြမ်းသော စက်တွင် ပိုမကြာခဏ စစ်ပါ။ အကာပျက်စီးမှု၊ ပေါ်နေသော သံကြိုး၊ Crimp တွင် စိမ့်ခြင်း၊ အချင်းချင်း ထိစ ပြုလာသော ပိုက်များ၊ နှင့် ချောင်လာသော clamp များကို ရှာပါ။ မီးရှူးဖြင့် နှစ်မိနစ်သည် အားလုံးနီးပါးကို တွေ့စေပြီး၊ အကာအဆင့်တွင် ဖမ်းမိသော ပိုက်သည် အစီအစဉ်မရှိ ရပ်ရခြင်းမဟုတ်ဘဲ စီစဉ်ထားသော လဲလှယ်မှု ဖြစ်သည်။
Does hose protection affect the bend radius?
ပိုက်အကာက ကွေးအချင်းဝက်ကို သက်ရောက်လား။
A spring guard stiffens the section it covers, which is usually what you want near a fitting but not in the middle of a flexing run. Fit the guard where the hose must not bend tightly and leave the flexing section free, otherwise the hose will bend sharply just beyond the end of the guard and fail there instead.
စပရင်အကာသည် ၎င်းဖုံးထားသော အပိုင်းကို မာစေပြီး၊ Fitting အနီးတွင် များသောအားဖြင့် လိုချင်သည့်အရာ ဖြစ်သော်လည်း ကွေးနေသော လမ်းကြောင်း အလယ်တွင် မလိုပါ။ ပိုက်သည် ကျစ်ကျစ် မကွေးရမည့်နေရာတွင် အကာတပ်ပြီး ကွေးသောအပိုင်းကို လွတ်ထားပါ — မဟုတ်ပါက ပိုက်သည် အကာအဆုံး၏ အလွန်တွင် ထက်ထက်ကွေးပြီး ထိုနေရာတွင် ပျက်မည်။
Comments
Please sign in to leave a comment.