Tubing is where wall thickness does most of the work and is easiest to overlook. Two 50x50 tubes can differ by a factor of two in weight and strength, and the listing tells you which is which by the wall figure and by the weight per piece.
ပိုက်များတွင် နံရံအထူသည် အလုပ်အများဆုံး လုပ်ပြီး အလွယ်ဆုံး မေ့လျော့ခံရသည်။ 50x50 ပိုက်နှစ်ခုသည် အလေးချိန်နှင့် ခိုင်ခံ့မှုတွင် နှစ်ဆအထိ ကွာနိုင်ပြီး၊ စာရင်းက နံရံကိန်းနှင့် တစ်ချောင်းလျှင် အလေးချိန်ဖြင့် ဘယ်ဟာက ဘယ်ဟာလဲ ပြောပြသည်။
What square tubing sizes do you carry?
ဘယ် စတုရန်းပိုက် အရွယ်တွေ ရှိလဲ။
From 25x25 up to 100x100 mm in our VINA One range, with walls from 0.7 to 1.4 mm and a standard 5800 mm length. A 25x25 at 1.0 mm wall is 4.15 kg per length; a 100x100 at 1.4 mm is 23.9 kg. Rectangular sizes sit alongside in the same family.
ကျွန်ုပ်တို့ VINA One အမျိုးအစားများတွင် ၂၅x၂၅ မှ ၁၀၀x၁၀၀ မီလီမီတာအထိ ရှိပြီး၊ နံရံ ၀.၇ မှ ၁.၄ မီလီမီတာနှင့် စံအရှည် ၅၈၀၀ မီလီမီတာ ဖြစ်သည်။ နံရံ ၁.၀ မီလီမီတာဖြင့် ၂၅x၂၅ သည် တစ်ချောင်းလျှင် ၄.၁၅ ကီလို။ နံရံ ၁.၄ မီလီမီတာဖြင့် ၁၀၀x၁၀၀ သည် ၂၃.၉ ကီလို ဖြစ်သည်။ ထောင့်မှန်စတုဂံ အရွယ်များသည် မိသားစုတူတွင် ဘေးချင်းယှဉ် ရှိသည်။
Why does wall thickness matter so much?
နံရံအထူက ဘာကြောင့် ဒီလောက် အရေးကြီးလဲ။
Because it is where nearly all the strength and all the weight live. Doubling the wall roughly doubles the material and the load the tube will carry, while the outside size stays the same — so two tubes that look identical on a rack can behave completely differently in a frame. Our listings put the wall figure in the title for exactly this reason.
ခိုင်ခံ့မှုနှင့် အလေးချိန် အားလုံးနီးပါး ရှိနေသည့်နေရာ ဖြစ်သောကြောင့်။ နံရံကို နှစ်ဆတိုးလျှင် ပစ္စည်းနှင့် ပိုက်ခံနိုင်သော ဝန်သည် နှစ်ဆခန့် တိုးပြီး၊ အပြင်အရွယ်က တူနေသည် — ထို့ကြောင့် စင်ပေါ်တွင် ပုံတူသော ပိုက်နှစ်ခုသည် ဘောင်တစ်ခုအတွင်း လုံးဝ ကွဲပြားစွာ ပြုမူနိုင်သည်။ ကျွန်ုပ်တို့ စာရင်းများသည် ဤအကြောင်းကြောင့်ပင် နံရံကိန်းကို ခေါင်းစဉ်တွင် ထည့်ထားသည်။
How is galvanised round tubing sized?
သွပ်ရည်စိမ် လုံးပိုက်ကို ဘယ်လို အရွယ်သတ်မှတ်လဲ။
By nominal bore, given as the outside diameter in millimetres. Our GI range reads 21.43, 26.99, 114.3, 139.7 and 165.1 mm — which are the metric equivalents of 1/2, 3/4, 4, 5 and 6 inch pipe. If someone asks for four inch GI pipe, 114.3 mm is what they mean.
အမည်ခံ အတွင်းအချင်းဖြင့် သတ်မှတ်ပြီး၊ မီလီမီတာဖြင့် အပြင်အချင်းအဖြစ် ပေးထားသည်။ ကျွန်ုပ်တို့ GI အမျိုးအစားများသည် ၂၁.၄၃၊ ၂၆.၉၉၊ ၁၁၄.၃၊ ၁၃၉.၇၊ ၁၆၅.၁ မီလီမီတာ ဖြစ်ပြီး — ၁/၂၊ ၃/၄၊ ၄၊ ၅၊ ၆ လက်မ ပိုက်များ၏ metric အစားထိုးများ ဖြစ်သည်။ တစ်ယောက်ယောက်က လေးလက်မ GI ပိုက် တောင်းလျှင် ၁၁၄.၃ မီလီမီတာကို ဆိုလိုခြင်း ဖြစ်သည်။
What does galvanised add?
သွပ်ရည်စိမ်ခြင်းက ဘာတိုးလဲ။
A zinc coating that protects the steel from rust, which is why GI tube is used for water, fencing, handrails and anything outdoors. The coating is sacrificial — it corrodes in place of the steel — so cutting or welding GI tube breaks the protection at that point and the cut end needs treating. Welding galvanised also produces fumes that must not be breathed.
သံမဏိကို သံချေးမှ ကာကွယ်သော သွပ်အလွှာ ဖြစ်ပြီး၊ ဒါကြောင့် GI ပိုက်ကို ရေ၊ ခြံစည်းရိုး၊ လက်ကိုင်တန်းနှင့် အပြင်ရှိ မည်သည့်အရာအတွက်မဆို သုံးသည်။ အလွှာသည် စတေးခံ ဖြစ်သည် — သံမဏိအစား ၎င်းက သံချေးတက်သည် — ထို့ကြောင့် GI ပိုက်ကို ဖြတ်ခြင်း သို့မဟုတ် ဂဟေဆော်ခြင်းသည် ထိုနေရာတွင် ကာကွယ်မှုကို ပျက်စေပြီး ဖြတ်အဖျားကို ကုသရန် လိုသည်။ သွပ်ရည်စိမ်ကို ဂဟေဆော်ခြင်းသည် မရှူရမည့် အခိုးအငွေ့များလည်း ထုတ်သည်။
What length does tubing come in?
ပိုက်က ဘယ်အရှည်နဲ့ လာလဲ။
5800 mm for both the square and the GI round ranges, which is close to but not the same as six metres. That 200 mm difference catches people who plan a cut list on a six metre assumption — work from 5800 and you will not be two hundred millimetres short on the last piece.
စတုရန်းနှင့် GI လုံး နှစ်မျိုးလုံးအတွက် ၅၈၀၀ မီလီမီတာ ဖြစ်ပြီး၊ ခြောက်မီတာနှင့် နီးသော်လည်း မတူပါ။ ထို ၂၀၀ မီလီမီတာ ကွာခြားချက်သည် ခြောက်မီတာဟု ယူဆ၍ ဖြတ်စာရင်း စီစဉ်သူများကို မှားစေတတ်သည် — ၅၈၀၀ မှ တွက်ပါ၊ နောက်ဆုံးအပိုင်းတွင် ၂၀၀ မီလီမီတာ လိုသွားမည် မဟုတ်ပါ။
Which tube should I use for a frame?
ဘောင်တစ်ခုအတွက် ဘယ်ပိုက် သုံးရမလဲ။
Square or rectangular for anything that has to bolt or weld flat to something else, round where appearance or water flow matters. Beyond that it is a load question, and load is decided by size and wall together. If the frame carries people or a vehicle, have the section checked by someone who can calculate it rather than choosing by eye.
တစ်ခုခုနှင့် ပြားပြား ဘော့တပ် သို့မဟုတ် ဂဟေဆော်ရမည့် မည်သည့်အရာအတွက်မဆို စတုရန်း သို့မဟုတ် ထောင့်မှန်စတုဂံ၊ အပြင်ပန်း သို့မဟုတ် ရေစီးဆင်းမှု အရေးကြီးသည့်နေရာတွင် လုံးပိုက်။ ထို့ထက် ၎င်းသည် ဝန်ဆိုင်ရာ မေးခွန်းဖြစ်ပြီး၊ ဝန်ကို အရွယ်နှင့် နံရံ ပေါင်း၍ ဆုံးဖြတ်သည်။ ဘောင်သည် လူ သို့မဟုတ် ယာဉ်ကို ထမ်းမည်ဆိုလျှင် မျက်စိဖြင့် ရွေးမည့်အစား တွက်ချက်နိုင်သူဖြင့် ပစ္စည်းကို စစ်ခိုင်းပါ။
What is the difference between tubing and pipe?
ပိုက် (tubing) နဲ့ ပိုက် (pipe) ဘာကွာလဲ။
Tubing is specified by its actual outside dimensions and wall thickness and is used structurally. Pipe is specified by nominal bore and is used to carry fluid. A 50 mm square tube is genuinely 50 mm across; a 50 mm pipe is a size name. Mixing the two vocabularies at the counter is the fastest way to be handed the wrong thing.
Tubing ကို ၎င်း၏ အမှန်တကယ် အပြင်အတိုင်းအတာများနှင့် နံရံအထူဖြင့် သတ်မှတ်ပြီး တည်ဆောက်ရေးတွင် သုံးသည်။ Pipe ကို အမည်ခံ အတွင်းအချင်းဖြင့် သတ်မှတ်ပြီး အရည်သယ်ရန် သုံးသည်။ ၅၀ မီလီမီတာ စတုရန်း tube သည် တကယ် ၅၀ မီလီမီတာ ကျယ်သည်။ ၅၀ မီလီမီတာ pipe သည် အရွယ်အမည် ဖြစ်သည်။ ကောင်တာတွင် ဝေါဟာရနှစ်မျိုး ရောပြောခြင်းသည် မှားသောပစ္စည်း ရရှိရန် အမြန်ဆုံးနည်း ဖြစ်သည်။
Comments
Please sign in to leave a comment.